Rohde & Schwarz R&S UPP, User Manual

Page: 212 / 938

Instrument Functions
R&S
®
UPP
196 User Manual 1411.1055.32 ─ 10
5.2 Configuring Analog Generator
5.2.1 Analog Generator Config Panel
Figure 5-1: Analog generator configuration panel
The "Analog" generator instrument does not require any options for 2
‑
channel genera-
tion and requires the R&S UPP
‑
B8 option (multichannel audio generator) for
eight
‑
channel generation.
The configuration options for the analog generator are described below.
Channel
Selection of the signal
‑
carrying XLR plugs on the front panel of the R&S UPP.
Selection of the channels on the 25
‑
pin D
‑
Sub socket with the setting "Multi", if the
R&S UPP
‑
B8 option (multichannel audio generator) is installed.
"OFF" Both XLR plugs are deactivated.
"1" XLR plug 1 supplies the generator signal; XLR plug 2 is deactivated.
"2" XLR plug 2 supplies the generator signal; XLR plug 1 is deactivated.
"2 = 1" Both XLR plugs supply an output signal.
Note: If the generator function Stereo Sine is selected, the output sig-
nal may differ regarding level and frequency.
Configuring Analog Generator