Instrument Functions
R&S
®
UPP
195
User Manual 1411.1055.32 ─ 10
5
Instrument Functions
5.1
Selecting the Generator
5.1.1
Generator Configuration Panel
The Configuration panel allows settings for the analog and digital generators.
To adapt the R&S
UPP generator to the measurement task at hand, first define the
settings in the Generator Config panel. These settings determine which capabilities are
available in the Generator Function panel.
Instrument
Used to select the generator.
"Analog"
Select analog 2-channel generator.
The user has access to a universal generator for almost any signal
form (up to 80
kHz).
If the option R&S
UPP-B8 (multichannel audio generator) is installed,
8 channels are available whose signals can be set individually for
each channel using the "Universal" generator function.
"Digital Audio"
Select digital audio generator.
Generating audio data in AES/EBU or SPDIF format.
"I
2
S"
Select I
2
S generator.
The I
2
S generator can generate audio data in I
2
S format.
"HDMI"
Select HDMI generator.
The HDMI generator can be used to output video and audio data
according to the HDMI 1.4 standard. In addition, the generation of
HDMI-specific info frames and protocol data is supported.
Remote command:
Selecting the Generator
Summary of Contents for R&S UPP
Page 1: ...R S UPP Audio Analyzer User Manual User Manual Version 10 1411105532 ÅP ...
Page 34: ...Contents R S UPP 18 User Manual 1411 1055 32 10 ...
Page 630: ...Instrument Functions R S UPP 614 User Manual 1411 1055 32 10 Format ...
Page 631: ...Instrument Functions R S UPP 615 User Manual 1411 1055 32 10 Format ...
