Rohde & Schwarz R&S UPP, User Manual

Page: 206 / 938

Manual Operation
R&S
®
UPP
190 User Manual 1411.1055.32 ─ 10
Key of the PC keyboard
Operation with mouse
Function
UP/DOWN cursor keys Move the focus in the panels, selection windows and tables
Change the entry value at the cursor position
LEFT/RIGHT cursor keys Moves the active cursor inside the graphical windows
Move the cursor position in entered values
Switch the measuring steps forwards and backwards for manual
sweeps
Table 4-6: WINDOW and SETUP panels
Key of the PC keyboard
Operation with mouse
Function
ALT + W Toggles between the softkey bar and the WINBAR
ALT + M Opens a selection of functions on the softkey bar; these functions can
be used to move or resize the active panel or graphical window
ALT + H Minimizes ("hides") the active panel or graphical window
ALT + C Closes the active panel or graphical window
F1 Opens and closes the context-sensitive help function
ALT + S Opens a panel for storing instrument settings
ALT + L Opens a panel for loading predefined instrument settings
ALT + P Loads the factory settings of the instrument
4.19 Overview of Panels and Measurement Displays
(Graphical Windows)
Panels which can be selected via the Instruments menu bar button:
Generator Config
●
Selection of instrument (analog or digital interfaces)
●
Configuration of channels
●
Bandwidth and sampling rate
●
Reference values
●
Synchronization settings and word length (for digital interfaces)
Generator Function
●
Selection of test signals
●
Sweep function
●
Frequency and level settings
●
Filter and equalizer
Analyzer Config
●
Selection of instrument (analog or digital interfaces)
●
Configuration of channels
●
Measurement bandwidth and sampling rate
●
Reference impedance
●
Start and trigger conditions
Overview of Panels and Measurement Displays (Graphical Windows)