Rohde & Schwarz R&S UPP, User Manual

Page: 162 / 938

Manual Operation
R&S
®
UPP
146 User Manual 1411.1055.32 ─ 10
A measured value for a linear unit is displayed with 3 to 7 digits; a measured value for
logarithmic units can be displayed with a resolution of 0.1
dB up to 0.00001 dB.
If the measured value underruns or overruns the preset limits, it appears red on black.
As soon as the measured value is back within the limits, it changes to green again.
If a measurement channel is switched off, the text OFF appears in the corresponding
measured value display.
If no measurement result is available (e.g. frequency result for DC measurement), "---"
appears.
4.8.3 Combo Display
It is often the case that the numeric value of a measurement result does not contain
adequate information. Additional features such as analog bar graphs, limit monitoring
or the storage of maximum and minimum values are frequently required.
The combo display is used for this purpose. Additional information can be displayed for
every measurement shown in the numeric display.
The free selection and free scalability mean that especially important or critical results
can be monitored and tracked even when viewing the R&S
UPP screen from a rela-
tively long distance.
4.8.3.1 Opening Combo Displays
The easiest way to open combo displays is by double-clicking on the corresponding
measured value display in the numeric display field.
The combo displays can also be opened via the menu bar: They are located under the
"Displays" button underneath the "Numeric Display" option. Depending on the channel
number of the selected analyzer instrument, fonts and menu structure for "Display"
Function, Lev Mon, Input, Frequency and Phase measurement results change.
Measurement Displays