Rohde & Schwarz R&S UPP, User Manual

Page: 139 / 938

Manual Operation
R&S
®
UPP
123 User Manual 1411.1055.32 ─ 10
Figure 4-1: R&S UPP display with its 5 screens
The user can toggle between the individual screens in the following way:
●
Using the PC keyboard using the shortcuts CTRL + PAGE UP or CTRL + PAGE
DOWN
●
First open the menu bar at the top of the display with the mouse , then click on the
Screen button and finally select the desired screen.
●
Alternatively, you can also select the desired screen directly by clicking the
appropriate number in the toolbar .
4.4.2 Softkeys
The softkey bar which has a varying range of functions is visible in normal operating
mode.
In most cases, the functions available in the selection windows of the panels are dis-
played in the eight buttons; these functions are displayed even if the parameter lists
have not (yet) been opened. The labeling of these buttons indicates the functions of
the softkeys underneath them.
The function that has just been selected is indicated by a "pressed" button, as shown
in the example below for the "RMS" function.
The Display