manualshive.com logo in svg

Rohde & Schwarz R&S RTO2000 Series, Getting Started

Share
Download
Rohde & Schwarz R&S RTO2000 Series Getting Started Download Page 45

Trying Out the Instrument

R&S

®

RTO2000

45

Getting Started 1332.9719.02 ─ 08

4.5

 

Zooming into the Display

Using the [Scale] rotary knobs, you can change the scaling of the timebase and signal
amplitudes to enlarge the waveform. To see more details, use one of the zoom func-
tions. The instrument has 4 zoom types, 2 of them you try out in this section.

The usage of zooms is also shown in a short video that is available on the instrument:
"File" menu > "Tutorials" > "Zoom".

4.5.1

 

Using the Standard Zoom

1. Restore the default signal channel settings by pressing the [Preset] and [Autoset]

keys.

2. On the toolbar, tap the "Zoom" icon.

3. Tap the position in the diagram that you want to define as one corner of the zoom

area. Then drag your finger to the opposite corner of the zoom area.
While you drag your finger on the touchscreen, a dotted rectangle indicates the
current zoom area. When the rectangle covers the required zoom area, remove
your finger.

Zooming into the Display

Summary of Contents for R&S RTO2000 Series











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands