Remote Control Commands
R&S
®
RTM3000
763
User Manual 1335.9090.02 ─ 08
Parameters:
<ThresholdCoupling> ON | OFF
*RST:
ON
DIGital<m>:THReshold
<ThresholdLevel>
Sets the logical threshold for the nibble (D0...D3, D4...D7, D8...D11, and D12...D15) to
which the indicated logic channel belongs.
Suffix:
<m>
.
0..15
Number of the logic channel
Parameters:
<ThresholdLevel>
*RST:
1.4
Default unit: V
DIGital<m>:HYSTeresis
<Hysteresis>
Defines the size of the hysteresis to avoid the change of signal states due to noise.
The setting applys to the logic pod to which the indicated logic channel belongs.
Suffix:
<m>
.
0..15
Selects the logic channel.
<p>
1..2
Selects the logic pod.
Parameters:
<Hysteresis>
SMALl | MEDium | LARGe
DIGital<m>:DESKew
<Deskew>
Sets the deskew value for the pod to wich the specified logic channel belongs. The
deskew value compensates delays that are known from the circuit specifics or caused
by the different length of cables. The skew between the probe boxes of the digital
channels and the probe connectors of the analog channels is automatically aligned by
the instrument.
Suffix:
<m>
.
0..15
Number of the logic channel. Each pod (D0...D7 and D8...D15)
has a common deskew.
Parameters:
<Deskew>
*RST:
0
Default unit: s
Mixed Signal Option (Option R&S
RTM-B1)
www.allice.de
Allice Messtechnik GmbH
