Rohde & Schwarz R&S RTB2000 User Manual Download

Page: 195 / 609

General instrument setup

R&S

RTB2000

195

User Manual 1333.1611.02 ─ 11

Grid

Defines how the grid is displayed.

"Lines"

Displays the grid as horizontal and vertical lines.

"Reticle"

Displays crosshairs instead of a grid.

"Off"

Removes the grid from the display.

Remote command:

DISPlay:GRID:STYLe

on page 452

Annotation ← Grid

Enables or disables the display of scale values and units for the x-axis and y-axis at
the grid lines. Per default, grid labels are enabled.

Remote command:

DISPlay:GRID:ANNotation[:ENABle]

on page 454

Track Grid ← Grid

If enabled, the grid moves with the waveforms if you change the waveform's position in
horizontal or vertical direction.

If disabled (= default), the grid remains centered on the display if you change the wave-
form's position.

Remote command:

DISPlay:GRID:ANNotation:TRACk

on page 454

10.3

Reset

Reset is helpful if the instrument is in undefined condition and cannot be operated.

To reset all waveform and measurement settings:

► Press [Preset].

Reset

Summary of Contents for R&S RTB2000


































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R&S RTB2000

Reviews:

Related manuals for R&S RTB2000

Brands by name

Popular brands

Rohde & Schwarz R&S RTB2000, User Manual

Search results

Summary of Contents for R&S RTB2000

Reviews:

Related manuals for R&S RTB2000

Brands by name

Popular brands