Waveform analysis
R&S
®
RTB2000
113
User Manual 1333.1611.02 ─ 11
6.4.5
Exporting history data
Data of history segments can be saved to files on a USB flash drive even if the history
is not active ("Show History" is disabled). You can select to save all visible channels, or
one channel. In addition, you can save the complete time information of the segment
table.
6.4.5.1
Saving history to file
Before you can save history data, acquire the waveform and activate the history, so
that the segment table is visible.
To save the waveform history segments
1. Connect a USB flash drive to the instrument.
2. Press the [Save Load] key.
3. Select "Waveforms" in the menu.
4. Under "Points", select "History Data".
5. Under "Source", select whether you want to store all visible channels, or one of
them.
6. Enter the "File Name". This name is the name of the folder that contains the seg-
ment files.
The file format is CSV.
7. To select the target folder, tap the "Destination" field.
The location is always "/USB_FRONT", saving to internal storage is not possible.
8. Tap "Save".
A message shows the progress of the saving process.
9. Close the dialog box.
History and segmented memory (option R&S
RTB-K15)