Rohde & Schwarz R&S NGL200 Series, User Manual

Page: 35 / 201

Operating Basics
R&S
®
NGL200/NGM200
33 User Manual 1178.8736.02 ─ 09
Figure 5-3: Color coding of difference operating conditions
Color Operating mode Description
DVM mode Available only with NGM models.
Display DVM measurement.
Editing mode A solid blue cursor is shown when an item is selected.
CV mode Active outputs are operated in a constant voltage mode.
CC mode Active outputs are operated in a constant current mode.
CR mode Active outputs are operated in a constant resistance mode.
This condition occurs if the set voltage is below the voltage
applied externally at the output connectors (sink mode) and
constant resistor is switched on in channel menu.
5.2 Using the Touchscreen
The R&S NGL/NGM provides a touch-sensitive screen. Touch can be disabled (see
Chapter 6.8, "User Key" , on page 71) in the instrument settings. The following illus-
trates the touchscreen gestures and highlight the different touchscreen features that
can be performed on the instrument.
5.2.1 Using Gestures
Tap
Tap on the screen to select or toggle the value.
Swipe up and down
Swipe up to scroll down, swipe down to scroll up in the menu.
5.2.2 Accessing Functionality in the Home Window
The following illustrates various ways of accessing functions in the home window.
Using the Touchscreen