Rohde & Schwarz R&S LCX Series User Manual Download Page 98

Page: 98 / 242

Instrument functions

R&S

LCX Series

User Manual 1179.2260.02 ─ 02

4. If you have connected an external USB memory device:

a) Select "Target Folder".

The R&S

LCX opens a selection editor.

b) Select "USB1A".
c) Confirm with "Select".

Note:

With no USB connected, the instrument displays a message and automati-

cally sets the internal partition, when confirmed.

The R&S

LCX saves the logging file in the predefined logging folder on the

selected memory location.

Configuring logging settings

The example shows the settings for logging mode "Span", with the parameters "Inter-
val", "Duration" and "Start Time" defined.

To configure the settings and activate logging:

1. Press the [settings] key at the front panel.

2. In the "Functions" tab, select "Logging".

3. Select "Mode" > "Span".

A selection editor opens.

4. Select "Span".

5. Confirm you selection.

6. To set the time parameters for the selected mode:

a) Select "Interval"
b) In the on-screen keypad, enter time and unit, e.g. "0.1

s".

c) Confirm with

d) Proceed the same way to set the duration and the start time.

Note:

For the start time, the R&S

LCX opens a selection editor, providing date set-

tings, and steps to a second editor for setting the start time at the selected date.

The R&S

LCX starts logging at the defined date and time, and stops after the dura-

tion time has elapsed. It generates the file name and saves the logging data in the
specified memory location, see

"Selecting the memory location"

on page 97.

To configure the other logging modes, proceed the same way.

8.8.4

Dynamic impedance measurement

Option: R&S

LCX-K106

The dynamic impedance measurement feature enables you to record a set of mea-
surement data acquired over a range of values for the selected measurement signal
parameter.

Specific instrument functions

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz R&S LCX Series, User Manual

Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands