Rohde & Schwarz R&S LCX Series User Manual Download Page 88

Page: 88 / 242

Instrument functions

R&S

LCX Series

User Manual 1179.2260.02 ─ 02

Indicates the time scaling of the x-axis in the chart.

<measurement parameter>

Indicates the selected measurement parameter with the specified unit per division.

Back

Returns to the "Functions" tab.

Clear

Resets the chart and restarts graphical display of the measurement.

8.8.1.2

Displaying the readings in the live chart

Displaying the results graphically

To display the measurement progress and the readings in the graphic view:

1. Press the [settings] key at the front panel.

2. In the "Functions" tab, select "Live Chart".

Figure 8-11: Graphic view

3. To configure a parameter for display:

a) Select a parameter softkey on the right of the screen.

The "Configure Chart Trace <n>" dialog opens.

Figure 8-12: Configure live chart dialog

Specific instrument functions

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz R&S LCX Series, User Manual

Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands