Measurement basics
R&S
®
LCX Series
47
User Manual 1179.2260.02 ─ 02
5
Measurement basics
The following graph shows the capacitive and inductive parts of passive components
during impedance measurement in dependency on the frequency and the phase shift.
phase
angle
above 45 ° = L
below -45 ° = C
Real axis
Imaginary axis
jX
R
Q = D = 1
Q = D = 1
Q = 500
D = 0.002 Ω
|Z| = 1000 Ω
Q = 500
D = 0.002 Ω
Q = 500
D = 0.002 Ω
Q = 500
D = 0.002 Ω
Figure 5-1: Phase angle and integral sections
L = inductance
R = resistance
C = capacitance
|Z| = impedance
D = dissipation factor
Q = quality factor
5.1
Impedance measurement parameters in general
The following table outlines the basic parameters and their definitions:
Table 5-1: Basic parameters and definitions
Parameter (designation and [unit])
Definition
Z
(
Ω
)
Impedance
|Z|
(
Ω
)
Magnitude of Z
Impedance measurement parameters in general
www.allice.de
Allice Messtechnik GmbH
