manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 46

Getting started

R&S

®

LCX Series

46

User Manual 1179.2260.02 ─ 02

b) Press the [rotary knob].

The selection editor opens.

c) Turn the knob to scroll within the list.
d) Press the [rotary knob] again to confirm your selection.

6. To access the main menus and subdialogs, use the functionality of the [rotary

knob] and the [

◀

] or [

▶

] keys the same way.

Entering alphanumeric parameters

If a field requires alphanumeric input, you can use the on-screen keyboard to enter let-
ters and (special) characters.

Access and control are similar as described above.

4.4.3

 

Remote control

In addition to operating the R&S

 

LCX directly on the instrument, it is also possible to

operate and control it from a remote PC.

Remote control interfaces

The R&S

 

LCX provides several interfaces for remote control:

●

Ethernet (LAN) interface

●

USB standard interface

●

IEE-488 bus interface (GPIB) (option: R&S NG-B105)

For detailed information on how to configure the remote control interfaces, see 

Chap-

ter 10, "Network operation and remote control"

, 

on page 139.

See 

Chapter 4.1.7, "Connecting to LAN"

, 

on page 21 for an example on how to set up

LAN connection for remote control.

Instrument control

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands