Getting started
R&S
®
LCX Series
44
User Manual 1179.2260.02 ─ 02
To open a dialog
To open one of the dialogs, or editors, you have several options:
1. Press the corresponding hardkey at the front panel, e.g. the [Freq.] key.
2. Select (tap) a softkey on the screen, e.g. "Frequency:"
To close a dialog
1. To return to the home screen, press the [home] key.
2. To return to a previous dialog, the R&S
LCX provides several softkeys:
● Softkeys that prompt you to confirm your selection, as e.g. "Select" or "Ok"
● the (back) softkey in the left upper corner of a dialog
● Softkeys that prompt you to confirm your selection, as e.g. "Select" or "Ok"
automatically close a dialog.
● the [Back] key or the [rotary knob] at the front panel
To select a parameter
If many parameters available, they are often provided in a list:
1. If necessary, scroll through the list.
Tip:
You do not need the focus exactly on the bar, touch and swipe the list.
2. As an alternative, you can use the [rotary knob]:
a) Turn the knob to select the parameter.
b) Press the knob to confirm your selection.
4.4.2.3
Entering data
Some parameters have their own key at the front panel.
For data input in dialogs, the instrument provides on-screen keypads for entering
numeric and alphanumeric values. Thus, you can always set the parameters using the
touchscreen, or the navigation controls at the front panel.
To correct an entry
1. To delete an entry, set the cursor to the right of the entry you want to delete. To
select the position:
a) Select (tap) it in the entry field directly.
b) Use the cursor softkeys of the on-screen keypad.
c) Use the [
◀
], or [
▶
] keys at the front panel.
2. On the on-screen keypad, select "Clear".
Deletes the entry to the left of the cursor.
3. Enter your correction.
Instrument control
www.allice.de
Allice Messtechnik GmbH
