manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 28

Getting started

R&S

®

LCX Series

28

User Manual 1179.2260.02 ─ 02

Table 4-2: Navigation controls

Key

Assigned functions

[Rotary knob]

Selects, activates or confirms settings.

[

◀

] / [

▶

]

Moves the cursor in entry fields.

[Back]

Returns to a previous level in menus, or closes a view.

Measurement mode keys

The measurement controls enable you to select the measurement mode and view of
the representation of the measurement readings.

Table 4-3: Measurement mode controls

Key

Assigned functions

[Meas. Mode]

Selects either continuous or manually triggered measurement mode.

[Display Mode]

Selects the display of measurement readings.

Function keys

The keys in the function panel select the parameters for the measurement.

Table 4-4: Measurement function controls

Key

Assigned functions

[L]

Selects the function for measuring inductance.

[C]

Selects the function for capacity measurement.

[R]

Selects the measurement for a resistor.

[Transformer]

Selects the transformer measurement.

Settings keys

The keys in the settings panel enable you to select measurement ranges and addi-
tional parameters for executing the measurement.

Table 4-5: Measurement function controls

Key

Assigned functions

[Freq.]

Sets the signal frequency.

[Range]

Selects the impedance range.

[Level]

Sets the level.

[Comp.]

Opens the "Open/Short/Load Correction" dialog for quick access.

[Bias Level]

Sets the bias voltage and current.

[Bias Enable]

Activates internal or external bias.

Measurement control keys

These keys provide control during the measuring procedure.

Instrument tour

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands