manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 25

Getting started

R&S

®

LCX Series

25

User Manual 1179.2260.02 ─ 02

4.1.10

 

Switching on or off

Switching on the product

The product is off but connected to power.

1. Set the switch on the power supply to position [I].

The power supply switch connector is on the 

rear panel

.

The R&S

 

LCX starts, and the front panel keys light up briefly.

2. Press the power key for a second.

The power is on the front panel.

The instrument checks the system, boots the operating system, and then starts the
R&S

 

LCX firmware.

The power lights green.
When starting for the first time, the R&S

 

LCX starts with the default settings. When

restarting the instrument, the settings depend on the instrument configuration
before shut-down.

Shutting down the product

► Press the power key.

All current settings are saved and the operating system shuts down.
The power changes to gray (off).

To disconnect from power

The product is in the standby state.

1.

NOTICE! 

Risk of data loss. If you disconnect the product from power when it is in

the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].

2. Disconnect the product from the power source.

4.2

 

Instrument tour

The following topics help you to get familiar with the instrument and perform the first
steps:

●

Front panel tour

●

Rear panel tour

The sections explain the controls and connections at the front and back of the
R&S

 

LCX. For specifications of the interfaces, see the data sheet.

The meanings of the labels on the R&S

 

LCX are described in 

Chapter 1.2, "Labels on

the R&S

 

LCX"

, 

on page 11.

Instrument tour

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands