manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 24

Getting started

R&S

®

LCX Series

24

User Manual 1179.2260.02 ─ 02

1

2

Figure 4-2: Connecting a test fixture

2. Carefully plug the test fixture to the four "BNC" measurement connectors of the

R&S

 

LCX (2).

3. Turn all levers to the right to tighten the connection (3).

3

Figure 4-3: Fastening the test fixture

The mechanical test setup is ready for operation.

Connecting a test fixture with the BNC-to-BNC extension

If you are using the BNC-to-BNC extension (option R&S

 

LCX-Z11), you can connect all

devices as described in 

Connecting a test fixture to the instrument

. We recommend

that you keep the order as follows:

1. Connect the BNC-to-BNC to the R&S

 

LCX.

Proceed as described in 

step 1

.

2. Connect the test fixture to the extension.

Preparing for use

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands