Remote control commands
R&S
®
LCX Series
211
User Manual 1179.2260.02 ─ 02
Usage:
Query only
STATus:QUEStionable:NTRansition
<Value>
Sets or queries the negative transition filter. If a bit is set, a 1 to 0 transition in the cor-
responding bit of the condition register causes a 1 to be written in the corresponding bit
of the event register.
Parameters:
<Value>
Bit mask in decimal representation
Range:
1 to 65535
STATus:QUEStionable:PTRansition
<Value>
Sets or queries the positive transition filter. If a bit is set, a 0 to 1 transition in the corre-
sponding bit of the condition register causes a 1 to be written in the corresponding bit
of the event register.
Parameters:
<Value>
Bit mask in decimal representation
Range:
1 to 65535
STATus:QUEStionable[:EVENt]?
Queries the contents of the EVENt part of the status register to check whether an
event has occurred since the last reading. Reading an EVENt register deletes its con-
tents.
Return values:
<QUEStionable>
Event bits in decimal representation
Range:
1 to 65535
Usage:
Query only
11.15
SYSTem subsystem
The
SYSTem
subsystem contains the commands for general functions which do not
directly affect instrument operation.
SYSTem subsystem
www.allice.de
Allice Messtechnik GmbH
