manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 156

Network operation and remote control

R&S

®

LCX Series

156

User Manual 1179.2260.02 ─ 02

The R&S

 

LCX uses port 21 by default, but you can use any port address in the range

of 100

 

to

 

65635.

How to: see 

"Assigning the FTP port address manually"

 

on page 161.

User name

Sets a user name for the FTP connection.

The user name consists of the instrument name by default, e.g. LCX200. To assign a
user-specific name, you can set any sequence with at least 1 letter and 1 digit.

How to: see 

"Assigning the FTP port address manually"

 

on page 161.

Password

Sets a password for the FTP connection.

The password is a string of characters to verify the identity for authentication. By
default, the password for FTP access corresponds to the serial number of your instru-
ment.

Note: 

We recommend that you assign a dedicated user-specific password. You can set

any character sequence with at least 1 letter and 1 digit.
How to: see 

"Assigning the FTP port address manually"

 

on page 161.

10.3.5

 

USB settings

For remote control over USB, you can address the R&S

 

LCX over the USB TMC class,

or the virtual COM port CDC (VCP).

Access:

1. Press the [settings] key at the front panel.

2. In the device settings menu, select "Interfaces".

3. Select "USB Class".

Figure 10-7: USB class selection editor

The R&S

 

LCX activates the connection and indicates the selected USB interface

port on top of the display.

USB Class

Selects the communication class protocol.

Remote access settings

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands