manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 14

Documentation overview

R&S

®

LCX Series

14

User Manual 1179.2260.02 ─ 02

3

 

Documentation overview

This section provides an overview of the R&S

 

LCX user documentation. Unless speci-

fied otherwise, you find the documents on the R&S

 

LCX product page at:

www.rohde-schwarz.com/manual/lcx

3.1

 

Getting started manual

Introduces the R&S

 

LCX and describes how to set up and start working with the prod-

uct. Includes basic operations, typical measurement examples, and general informa-
tion, e.g. safety instructions, etc. A printed version is delivered with the instrument.

3.2

 

User manual

The user manual contains the description of all instrument modes and functions. It also
provides an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance, instrument
interfaces and error messages. Includes the contents of the getting started manual.

The user manual is also available for download or for immediate display on the Inter-
net.

3.3

 

Tutorials

Tutorials offer guided examples and demonstrations on operating the R&S

 

LCX. They

are provided on the product page of the internet.

3.4

 

Service manual

Describes the performance test for checking compliance with rated specifications, firm-
ware update and maintenance.

The service manual is available for registered users on the global Rohde

 

&

 

Schwarz

information system (GLORIS): 

https://gloris.rohde-schwarz.com

3.5

 

Instrument security procedures

Deals with security issues when working with the R&S

 

LCX in secure areas. It is avail-

able for download on the Internet.

Instrument security procedures

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands