manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 136

General instrument settings

R&S

®

LCX Series

136

User Manual 1179.2260.02 ─ 02

3. If confirmed, a second message provides to delete all internally saved files.

4. Confirm the prompt accordingly.

The R&S

 

LCX resets all instrument settings to factory default and shuts down.

5. Press the [power] to restart the instrument.

9.13

 

Customizing general instrument settings

The R&S

 

LCX enables you to set the instrument internal clock and calender, or to cus-

tomize the brightness of the screen display and the front panel keys. In addition, you
can activate an acoustic sound for specific occurrences.

Setting date and time

To set the instrument internal calender and clock:

1. Press the [settings] key at the front panel.

2. In the "Device" tab, select "Date & Time".

3. To set the date:

a) Select the "Set Date" softkey.

An on-screen editor with calender entries opens.

Figure 9-15: Date editor

b) Select year, month and date.
c) Confirm your entry with "Set".

4. To set the time:

Customizing general instrument settings

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands