manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 102

Instrument functions

R&S

®

LCX Series

102

User Manual 1179.2260.02 ─ 02

4. Depending on the selected interval type, configure the value for the step size or the

number of points to set the values of the sweep parameter within the range.

5. To start the dynamic impedance measurement process, turn 

 "Enabled".

A dialog box appears that shows the progress of the dynamic impedance measure-
ment.

Note: 

Do not press any buttons on the instrument while the process is running.

Tip: 

As a dynamic impedance process can take a long time, you can abort the

measurement with 

"Abort"

 

on page 101.

When completed, the R&S

 

LCX displays a graphical view of the acquired measure-

ment data. It saves the generated log file with the file name indicated on the upper
left side of the screen.

Canceling a dynamic impedance measurement

Once you have started the process, you can cancel the measurement in the progress
dialog displayed.

1. Select "Abort".

The R&S

 

LCX displays a message informing you on the recorded log file and its

storage location.

2. Confirm with "OK".

3. To evaluate the report in the log file:

a) If necessary, connect a USB memory device at the front panel "USB" connec-

tor.

b) Use the file manager to copy the log file to the memory device, see 

Chap-

ter 9.1.1, "File manager settings"

, 

on page 113.

c) Upload the file on a PC.

For evaluation, you can use any application that supports 

*.csv

 file format.

8.8.5

 

Binning

Option: R&S

 

LCX-K107

Specific instrument functions

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands