Front and Rear Panel View
R&S
®
FSVA/FSV
22
Quick Start Guide 1321.3066.02 ─ 05
current of 140 mA is available. This connector is suitable as power supply for
high-impedance probes from Agilent.
2.1.3.5
POWER SENSOR
The LEMOSA female connector is used to connect power sensors of the R&S
NRP family (requires option R&S
FSVA/FSV-K9). For details on supported power
sensors see the data sheet.
2.1.4
Optional Front Panel Connectors
2.1.4.1
AF OUTPUT (Audio Demodulator option, R&S
FSV-B3)
Headphones equipped with a miniature jack plug can be connected to the AF out-
put female connector. The internal impedance is 10 Ω. The output voltage can be
set by using the volume control to the right of the female connector. If a plug is
connected, the internal loudspeaker is automatically switched off.
The female connector and volume control are available only with the audio
demodulator option (R&S
FSV-B3). To use the AF OUTPUT, in the "In-/Output"
menu (INPUT/OUTPUT key), select "Video Output". The output voltage (volume)
is 1V.
Risk of hearing damage
To protect your hearing, make sure that the volume setting is not too high
before putting on the headphones.
2.1.4.2
Tracking Generator Output (GEN OUTPUT 50Ω, Option R&S
FSV-
B9)
The R&S
FSVA/FSV is equipped with an optional tracking generator and there-
fore provides a tracking generator output connector.
Front Panel View
Summary of Contents for R&S FSV
Page 25: ......
