Appendix: LAN Interface
R&S
®
FSVA/FSV
168
Quick Start Guide 1321.3066.02 ─ 05
Connection to networks
Before connecting the instrument to the network or configuring the network,
consult your network administrator, particularly for large LAN installations.
Errors may affect the entire network.
Never connect your analyzer to a network unprotected against virus infec-
tion because this may cause damage to the instrument software.
To integrate the instrument into your network, you can change the following sys-
tem properties:
●
Computer name
●
Domain
●
Workgroup
8.1.1
Changing the Computer Name
1. Press the SETUP function key on the front panel of the R&S
FSVA/FSV.
2. Press the "General Setup" softkey.
3. Press the "Network Address" softkey.
The submenu is displayed.
4. Press the "Computer Name" softkey and enter the computer name.
5. If you enter an invalid name, the error "message out of range" is displayed in
the status line. The edit dialog box remains open, and you can start again.
If the settings are correct, the configuration is saved, and you are prompted to
restart the instrument.
6. Confirm the displayed message ("Yes" button) to restart the instrument.
Configuring the Network
Summary of Contents for R&S FSV
Page 25: ......
