Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 600 / 796

R&S FSP Remote Control – Description of Commands
SENSe Subsystem
6.206 Operating Manual 1164.4556.12 - 06
6.16.13 SENSe:TV Subsystem
This subsystem controls the TV trigger part of option R&S FSP-B6 (TV and RF trigger). The setup of the
individual trigger parameters is included in subsystem TRIGger.
[SENSe<1|2>:]TV:CCVS INTernal | EXTernal
This command selects between an internal and an external CCVS signal as TV demodulator input
signal.
Example:
"TV:CCVS EXT"
Characteristics: *RST value: INT
SCPI: device-specific
Mode: A-T
This command is only available with option R&S FSP-B6 (TV and RF Trigger).
[SENSe<1|2>:]TV[:STATe] ON | OFF
This command switches triggering on TV signals on or off.
Example:
"TV ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A-T
This command is only available with option R&S FSP-B6 (TV and RF Trigger).