Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 560 / 796

R&S FSP Remote Control – Description of Commands
SENSe Subsystem
6.166 Operating Manual 1164.4556.12 - 06
[SENSe<1|2>:]ESPectrum:RRANge?
This command returns the numer of the reference range of the Spectrum Emission Mask
measurement.
The numeric suffixes <1...20> specify the range. The numeric suffix at SENSe<1|2> is irrelevant.
Example:
"ESP:RRAN?"
Characteristics: *RST value:-
SCPI: device-specific
Mode: A
[SENSe<1|2>:]ESPectrum:RTYPe PEAK | CPOWer
This command sets selects the type of power measurement in the reference range:
The numeric suffixes <1...20> specify the range. The numeric suffix at SENSe<1|2> is irrelevant.
Parameter: PEAK: Measures the highest peak within the reference range.
CPOWer: Measures the channel power within the reference range (integral
bandwidth method).
Example:
"ESP:RTYP PEAK"
'selects highest peak
Characteristics: *RST value: CPOW
SCPI: device-specific
Mode: A