Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 544 / 796

R&S FSP Remote Control – Description of Commands
SENSe Subsystem
6.150 Operating Manual 1164.4556.12 - 06
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:CATalog?
This command queries all the names of the conversion loss tables saved on the hard disc.
The syntax of the output is:
<sum of file length of all following files>,<free spaces on hard disc>,
<1
st file name>,<1 st file length>,<2 nd file name>,<2 nd file length>,...,<n th file name>,
<n th file length>,
Example:
":CORR:CVL:CAT?"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:CLEar
This command deletes the selected Conversion Loss Table. Prior to this command, the command
SENS:CORR:CVL:SEL
must be sent.
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:CLE"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event which is why it is not assigned an *RST value.
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:COMMent <string>
This command defines the comment in the Conversion Loss Table. Prior to this command, the
command
SENS:CORR:CVL:SEL
must be sent.
Parameter: <string>::= Comment of mixer with a maximum of 60 characters
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:COMMENT 'MIXER FOR BAND U'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).