Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 528 / 796

R&S FSP Remote Control – Description of Commands
MMEMory Subsystem
6.134 Operating Manual 1164.4556.12 - 06
MMEMory:LOAD:STATe 1,<file_name>
This command loads device settings from data set files ( *.FSP ). The contents of the file are loaded and
set as the new device state. Items can be individually deselected for the recall. The maximum items to
be loaded are the maximum number of items stored in the data set file. If items were deselected for
storage, thoses items cannot be recalled.
The file name includes indication of the path and may also include the drive name. The default path
for data set files is
D:\USER\CONFIG .
Parameter: <file_name> ::= DOS file name without extension
Example:
"MMEM:LOAD:STAT 1,'A:TEST'"
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:MDIRectory <directory_name>
This command creates a new directory. The file name includes indication of the path and may also
include the drive name. The path name complies with DOS conventions.
Parameter: <directory_name>::= DOS path name
Example:
"MMEM:MDIR 'D:\USER\DATA'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:MOVE <file_source>,<file_destination>
This command renames existing files, if <file_destination> contains no path indication. Otherwise the
file is moved to the indicated path and stored under the file name specified there, if any.
The file name includes indication of the path and may also include the drive. The path name complies
with DOS conventions.
Parameter: <file_source>,<file_destination> ::= <file_name>
<file_name> ::= DOS file name
Example:
"MMEM:MOVE 'D:\TEST01.CFG','SETUP.CFG'"
'Renames TEST01.CFG in SETUP.CFG in directory D:\.
"MMEM:MOVE 'D:\TEST01.CFG','D:\USER\DATA'"
'Moves TEST01.CFG from D:\ to D:\USER\DATA.
"MMEM:MOVE 'D:\TEST01.CFG','D:\USER\DATA\SETUP.CFG'"
'Moves TEST01.CFG from D:\ to D:\USER\DATA and renames the file in
SETUP.CFG.
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no *RST value and no query.