Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 408 / 796

R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
6.14 Operating Manual 1164.4556.12 - 06
6.5.1 CALCulate:DELTamarker Subsystem
The CALCulate:DELTamarker subsystem controls the delta-marker functions in the instrument.
The measurement windows are selected via CALCulate1 (screen A) or 2 (screen B).
CALCulate<1|2>:DELTamarker<1...4>:AOFF
This command switches off all active delta markers.
The measurement windows are selected via CALCulate1 (screen A) or 2 (screen B).
Example:
"CALC:DELT:AOFF"
'Switches off all delta markers in screen A.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
<numeric_value>
This command sets the reference point level for all delta markers in the selected measurement window
for a measurement with fixed reference point (
CALC:DELT:FUNC:FIX:STAT ON
) to the peak of the
selected trace.
For phase noise measurements (
CALCulate:DELTamarker:FUNCtion:PNOise:STATe ON
), the
command defines a new reference point level for delta marker 2 in the selected measurement window.
Example:
"CALC:DELT:FUNC:FIX:RPO:MAX"
'Sets the reference point level for the delta marker in screen A to the peak of the
trace.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:FIXed:RPOint:X <numeric_value>
This command defines a new reference frequency (span > 0) or time (span = 0) for all delta markers
in the selected measurement window for a measurement with fixed reference value (
CALCulate:
DELTamarker:FUNCtion:FIXed:STATe ON
).
For phase noise measurements (
CALCulate:DELTamarker:FUNCtion:PNOise:STATe ON
), the
command defines a new reference frequency or time for delta marker 2 in the selected measurement
window.
Example:
"CALC2:DELT:FUNC:FIX:RPO:X 128MHz"
'Sets the reference frequency in screen B to 128 MHz.
Characteristics: *RST value: - (
FUNction:FIXed[:STATe]
is set to
OFF
)
SCPI: device-specific
Mode: A