Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 288 / 796

R&S FSP Instrument Functions
Tracking Generator – Option R&S FSP-B9
4.216 Operating Manual 1164.4556.12 - 06
4.8.2.2 Normalization
NORMALIZE The NORMALIZE softkey switches the normalization on or off. The softkey is only
available if the memory contains a correction trace.
It is possible to shift the relative reference point within the grid using the REF VALUE
POSITION softkey. Thus, the trace can be shifted from the upper border of the grid
to the vertical center of the grid:
Fig. 4.21 Normalized display
In SPLIT SCREEN operation, the normalization is switched on in the currently active
window. Different types of normalization can be active in the two windows.
Normalization is aborted when the NETWORK operating mode is quit.
Remote command:
CORR ON
REF VALUE
POSITION
The REF VALUE POSITION softkey marks a reference position in the active window
at which the normalization result (calculated difference with a reference trace) is dis-
played.
If no reference line is active, the softkey switches on a reference line and activates
the input of its position. The line can be moved within the grid boundaries.
The reference line is switched off by pressing the softkey again.
The function of the reference line is explained in the section “Calibration Mecha-
nism” on page 4.220 .