Rohde & Schwarz R&S FSP Series Operating Manual Download Page 277

Page: 277 / 796

Operating Manual 1164.4556.12 - 06

4.205

R&S FSP

Instrument Functions

Basic Settings

After clicking the

COMMENT

softkey, the auxiliary line editor can be reached with

the

key. Pressing the rotary knob or the

ENTER

key inserts the selected charac-

ters in the text line.

After editing is completed, return to the text line with the

key and confirm the

comment text with

ENTER

If the entered comment should be aborted, quit the auxiliary line editor with

ESC

A detailed description of the auxiliary line editor can be found in the Quick Start
Guide, chapter 4, “Basic Operation”.

Remote command:

HCOP:ITEM:WIND2:TEXT 'Comment'

INSTALL
PRINTER

A certain number of printer drivers is already installed on the R&S FSP.

The

INSTALL PRINTER

softkey opens the

Printers and Faxes

dialog where more

printer drivers can be installed.

For details refer to the Quick Start Guide, appendix A.

Remote command:

4.6.5.1

Selecting Printer Colors

COLORS

The

COMMENT

softkey opens the auxiliary line editor where the desired letters

can be entered in the text field by means of rotary knob and cursor keys.

Only after the auxiliary line editor has been closed with

ESC

can the softkeys and

hardkeys be operated again.

This softkey is only available with the R&S FSP-B16 option.

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R&S FSP Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz R&S FSP Series, Operating Manual

Search results

Summary of Contents for R&S FSP Series

Reviews:

Brands by name

Popular brands