Rohde & Schwarz R&S FPS, Getting Started

Page: 128 / 148

Operating the Instrument in Manual Mode
R&S
®
FPS
105 Getting Started 1319.3362.02 ─ 07
UNCAL One of the following conditions applies:
●
Correction data has been switched off.
●
No correction values are available, for example after a firmware update.
●
Record the correction data by performing a self alignment
(For details refer to
Chapter 2.4, "Performing a Self Alignment and a
Self Test" , on page 23).
WRONG_FW The firmware version is out-of-date and does not support the currently
installed hardware. Until the firmware version is updated, this error mes-
sage is displayed and self-alignment fails.
(For details refer to the R&S
FPS User Manual).
6.3 Changing the Focus
Any selected function is always performed on the currently focused element in the
display, e.g. a dialog field, diagram, or table row. Which element is focused is
indicated by a blue frame (diagram, window, table) or is otherwise highlighted
(softkey, marker etc.). Moving the focus is most easily done by selecting the ele-
ment in the display using the mouse pointer. Alternatively, use the "Tab" key on
the on-screen keyboard to move the focus from one element to the next on the
display.
To move the focus between any displayed diagrams or tables in a win-
dow, select the "Change focus" key. The focus moves from the diagram
to the first table to the next table etc. and then back to the diagram, within the
same window.
6.4 Entering Data
Data can be entered in dialog boxes using an external keyboard or the keyboard
of the controller PC.
6.4.1 Entering Numeric Parameters
If a field requires numeric input, the keypad provides only numbers.
Entering Data