Remote Commands
R&S
®
Spectrum Rider FPH
362
User Manual 1321.1011.02 ─ 06.00
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:ADEMod:CARRier[:RESult]?
This command displays the Carrier Power value for both AM/FM.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Example:
CALC:MARK:FUNC:ADEM:CARR?
Reads out the Carrier Power value for both AM/FM.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:ADEMod:AM[:RESult]?
<MeasType>
This command displays the results of frequency deviation for AM.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<MeasType>
PPEak | MPEak | MIDDle | RMS
PPEak
+Peak value
MPEak
-Peak value
MIDDle
-
±
Peak value
/
2
RMS
RMS value
Example:
CALC:MARK:FUNC:ADEM:AM RMS
Reads out the RMS value for AM.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:ADEMod:FM[:RESult]?
<MeasType>
This command displays the results of frequency deviation for FM.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Remote Control - Commands