Rohde & Schwarz R&S FPH, User Manual

Page: 315 / 484

Remote Commands
R&S ® Spectrum Rider FPH
310 User Manual 1321.1011.02 ─ 06.00
●
CALCulate<1...2>:DELTamarker<1...6>:MINimum[:PEAK]
on page 311
●
CALCulate<1...2>:DELTamarker<1...6>:X
on page 311
●
CALCulate<1...2>:DELTamarker<1...6>:X:RELative
on page 312
●
CALCulate<1...2>:DELTamarker<1...6>:Y?
on page 312
●
CALCulate<1...2>:MARKer<1...6>[:STATe]
on page 313
●
CALCulate<1...2>:MARKer<1...6>:AOFF
on page 313
●
CALCulate<1...2>:MARKer<1...6>:MAXimum[:PEAK]
on page 314
●
CALCulate<1...2>:MARKer<1...6>:MAXimum:NEXT
on page 314
●
CALCulate<1...2>:MARKer<1...6>:MINimum[:PEAK]
on page 314
●
CALCulate<1...2>:MARKer<1...6>:X
on page 314
●
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>[:STATe]
on page 315
●
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:LEFT
on page 315
●
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:RIGHt
on page 316
●
CALCulate<1...2>:MARKer<1...6>:Y?
on page 316
CALCulate<1...2>:DELTamarker<1...6>[:STATe] <State>
This command turns delta markers on and off.
If you set the suffix at DELTamarker to 1, or use no suffix, the R&S Spectrum Rider
interprets this as delta marker 2 because the first marker has to be a normal marker. If
more than one normal marker (2 to 6) is already active, the command turns these
markers into delta markers. If no delta marker is active yet, the command activates the
delta marker and positions it on the trace maximum.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Parameters:
<State> ON | OFF
*RST:
OFF
Example:
CALC:DELT3 ON
Turns on delta marker 3 or turn marker 3 into a delta marker.
CALCulate<1...2>:DELTamarker<1...6>:AOFF
This command turns off all active delta markers.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example:
CALC:DELT:AOFF
Turns off all delta markers.
Remote Control - Commands