Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
185
User Manual 1321.1011.02 ─ 06.00
1. Select the delta marker you want to convert in the
The selected marker is highlighted in the
sponding label in the trace window turns focus with a blue frame around the marker
label. The R&S Spectrum Rider opens a marker input field.
Alternatively, you can press the [MARKER] key to select the delta marker you want
to convert with the "Select Marker" softkey
2. Select the "Marker Type" softkey.
The delta marker turns into a normal marker. Its label changes accordingly (e.g. D2
to M2) and its coordinates are now absolute values.
6.2.7.5
Automatic Positioning of Markers
The R&S Spectrum Rider offers functions that make setting the markers easier or allow
to make instrument settings on the basis of the current marker position:
1. Press the [MARKER] key.
2. Select the "Set to Peak", "Set to Next Peak" or "Set to Minimum" softkey.
The R&S Spectrum Rider positions the marker accordingly.
The R&S Spectrum Rider provides the following selections for automatic positioning of
markers:
●
"Set to Peak"
The peak function places the active marker or the delta marker on the highest level
value of the trace.
●
"Set to Next Peak"
The Next Peak function places the active marker or delta marker on the next high-
est level value of the trace, relative to its current position.
●
"Set to Minimum"
The minimum function places the active marker or delta marker on the lowest value
of the trace.
6.2.7.6
Removing Markers
Remove markers any time you want from the trace window.
Removing selected markers
1. Select the marker you want to delete in the
Alternatively, you can select the marker you want to delete with the "Select Marker"
softkey
The selected marker is highlighted in the
sponding label in the trace window turns focus with a blue frame around the marker
label. The R&S Spectrum Rider opens a marker input field.
2. Press the "Delete Marker" softkey.
Configuring Spectrum Measurements
