Rohde & Schwarz R&S FPH User Manual Download

Page: 112 / 484

Instrument Functions

R&S

Spectrum Rider FPH

107

User Manual 1321.1011.02 ─ 06.00

3. Select the desired files or file directories in the file manager.

Alternatively, press the "Mark" softkey to select the desired files or files directories.

4. Select the "Edit" softkey.

The R&S Spectrum Rider displays a submenu for selection.

5. Select the "Delete" menu item to delete the files or file directories.

Before deleting, the R&S Spectrum Rider shows a warning message that you need
to confirm.

6. Select "Yes" to delete the selected files or file directories.

The R&S Spectrum Rider deletes the selected files or file directories from its mem-
ory.

4.9

Updating the Firmware

You can download new firmware versions from the R&S Spectrum Rider website.

http://www.rohde-schwarz.com/product/fph.html

The website also provides release notes for each new firmware version. The release

notes include instructions on how to perform a firmware update.

4.10

Installing Firmware Options

You can equip the R&S Spectrum Rider with several firmware options to enable addi-

tional operating modes or special measurements.
For more information, see the "Getting_Started" manual.

Installing Firmware Options

Summary of Contents for R&S FPH





































































































































































































































































































































































































































































































Search results

Summary of Contents for R&S FPH

Reviews:

Related manuals for R&S FPH

Brands by name

Popular brands

Rohde & Schwarz R&S FPH, User Manual

Search results

Summary of Contents for R&S FPH

Reviews:

Related manuals for R&S FPH

Brands by name

Popular brands