Instrument Functions
R&S
®
Spectrum Rider FPH
95
User Manual 1321.1011.02 ─ 06.00
4.4
Configuring Measurements
The "Config Overview" dialog box provides an overview of the current configuration of
the R&S Spectrum Rider. In addition, you can also change the configuration in this dia-
log box.
1. Press the [SETUP] key.
2. Select the "Config Overview" softkey.
3. Select one of the dialog boxes and change the settings as you like.
Note that the contents of the "Config Overview" dialog box are customized for each
operating mode of the R&S Spectrum Rider. Therefore, the order and number of dis-
played settings is different in each mode.
4.5
Working Directory
Using the "Working Directory", you can customize the folder directory to save the
screenshots and datasets captured during measurement.
1. Press the SETUP key.
2. Select the "User Preference" softkey.
3. In the "User Preferences" dialog box, select the "Using working directory" item.
4. Select "On" to activate the customize folder directory or "Off" to use the default
storage device in the R&S Spectrum Rider. See
5. Define the folder name in the "Working directory" item.
4.6
Taking Screenshots
Taking Screenshots
