manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, User Manual, Page: 87 / 388

Share
Download
Rohde & Schwarz R&S CMW-KM300 User Manual Download Page 87

NB-IoT Signaling

R&S

®

CMW-KM300/-KS300

87

User Manual 1178.5689.02 ─ 06

Figure 2-52: Incoming SMS parameters

Select File

Selects a file from the system drive folder 

@USERDATA\sms\NBIOT\Received

.

Incoming messages are stored there with the file extension 

.sms

.

Only messages received in the current session are available. The files are deleted dur-
ing startup.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:INComing:FILE
CONFigure:NIOT:SIGN<i>:SMS:INComing:FILE:INFO?

Data Coding / Character Set

Indicates whether the last received message is a 7-bit ASCII message, an 8-bit binary
message or a 16-bit Unicode message.

Remote command: 

SENSe:NIOT:SIGN<i>:SMS:INComing:INFO:DCODing?

Message Text / Message Length

Show the text and length of the last received SMS message.

Remote command: 

SENSe:NIOT:SIGN<i>:SMS:INComing:INFO:MTEXt?
SENSe:NIOT:SIGN<i>:SMS:INComing:INFO:MLENgth?

Clear Message Text

The button resets all parameters related to a received message.

The message information is deleted. The "message read" flag is set to true.

Remote command: 

SENSe:NIOT:SIGN<i>:SMS:INFO:LRMessage:RFLag?
CLEan:NIOT:SIGN<i>:SMS:INComing:INFO:MTEXt

2.3.13

 

Message Monitoring Settings

Messages exchanged between the NB-IoT signaling application and the UE can be
monitored. For this purpose, the messages are sent to an external PC.

GUI Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for R&S CMW-KM300





































































































































































































































































































































































































Reviews:

No comments