Rohde & Schwarz R&S CMW-KM300, User Manual, Page: 291 / 388

NB-IoT Multi-Evaluation Measurement
R&S
®
CMW-KM300/-KS300
291 User Manual 1178.5689.02 ─ 06
<Peak> Range: 0 deg to 180 deg
*RST: 35 deg, OFF
Default unit: deg
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Example: See Specifying Limits
Firmware/Software: V3.5.10
Manual operation: See "EVM, magnitude error, phase error limit settings"
on page 239
CONFigure:NIOT:MEAS<i>:MEValuation:LIMit:FERRor <FreqErrEnable>,
<FreqErrLow>, <FreqErrHigh>
Defines upper limits for the carrier frequency error.
Parameters:
<FreqErrEnable> OFF | ON
OFF : disables the limit check
ON : enables the limit check
*RST: ON
<FreqErrLow> Upper limit for frequencies up to 1 GHz
Range:
0 ppm to 1 ppm
*RST: 0.2 ppm
<FreqErrHigh> Upper limit for frequencies above 1 GHz
Range:
0 ppm to 1 ppm
*RST: 0.1 ppm
Example: See Specifying Limits
Firmware/Software: V3.5.10
Manual operation: See "Frequency error limit settings" on page 240
CONFigure:NIOT:MEAS<i>:MEValuation:LIMit:IQOFfset <Enable>, <Offset1>,
<Offset2>, <Offset3>
Defines upper limits for the I/Q origin offset. Three different limits can be set for three
TX power ranges. For details, see
Chapter 3.3.6.3, "I/Q Origin Offset Limits" ,
on page 240.
Parameters:
<Enable> OFF | ON
OFF : disables the limit check
ON : enables the limit check
*RST: ON
Command Reference
深圳德标仪器
135-1095-0799