R&S OSP
Instrument Functions
R&S OSP Instrument Frame
Quick Start Guide 1505.3896.62 - 14
80
5.1.5 R&S OSP150 Version15 and Module Slots
The R&S OSP150 Version 15 is designed with two slots in the front side in addition to
the three slots at the rear side as described above.
Slot A12F
Slot A13F
Figure 5-10: R&S OSP150 Version15 Module Slots at front side
Standard Configuration:
The slots in the front side are designated with A12F and A13F. For installation of
modules, the following order is defined as standard:
The first module installed from OSP front side always is mounted in slot A13F. From
interface point of view it corresponds to slot A13 (connected via cable W7
– see figure
below).
The second module installed from OSP front side is mounted in slot A12F. From
interface point of view it corresponds to slot A12 (connected via cable W6
– see figure
below).
Figure 5-11: Block Diagram R&S OSP150 Var. 15
Configuration of 2-slot modules:
OSP modules with 2-slot size and requiring two interface cables W6 and W7 (like the
modules OSP-B105/-B115/-B125/-B126) only can be mounted in A12/A13 or
A12F/A13F.
That means with a 2-slot module configured in A12/A13 and one module configured in
the OSP front side, only interface cable W5 (corresponding to A11) is left for A13F).
Summary of Contents for OSP-B011
Page 132: ......
