manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 94

Instrument Functions

NRP2

91

User Manual 1173.9140.02 ─ 07

To stop the measurement

► Press the DEL/1TRIG hardkey.

 is indicated in the title bar.

To start the measurement again

► Press the DEL/1TRIG hardkey.

 is indicated in the title bar.

4.3 Displaying measurement results

The R&S

 

NRP2 provides a total of four windows for displaying results.

4.3.1 Arranging windows

Windows are displayed in numerical order from the top to the bottom of the screen.
The R&S

 

NRP2 automatically selects the window size according to the number of dis-

played windows.

Fig. 4-23: Arranging windows

4.3.2 Labeling windows

The windows are numbered from 1 to 4 and are therefore clearly identifiable. By
default, they are labeled by the window’s number (1 to 4). The label is displayed in the
top left of the title bar.

Windows can also be assigned a name, see "Window Name" in the "File" menu. The
name is displayed in the window’s title bar . Assigning meaningful names to the win-
dows makes it much easier to recognize the associated measurement.. A name like
"Amplifier output" is more informative than "Channel A" or "Window 2".

The names of the windows are also stored in the setups.

 

 

 

Displaying measurement results

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands