Operating Concepts
R&S
®
NRP-Zxx
34
Getting Started 1176.8822.02 ─ 04
5. If necessary, perform further settings.
For a detailed description of how to measure in this setup, refer to the operating
manual of your R&S
NRP2.
6.6
Compatible Instrument
Many Rohde & Schwarz instruments allow power measurements using the R&S
NRP
‑
Z power sensors. For example, the power sensors can be used with a signal
generator to achieve stable and accurate RF power, which can be further sup-
plied to your DUT.
You can connect the power sensors to the following instrument connectors:
●
Directly to the SENSOR connector
●
To the USB port of the instrument, using an R&S
NRP
‑
Z3 or R&S
NRP
‑
Z4
USB adapter
●
To the USB port of the instrument, using an R&S
NRP
‑
Z5 USB hub
Refer to the operating manual of your Rohde & Schwarz instrument to find out if it
supports power measurements with the R&S NRP
‑
Z power sensors.
Required equipment
●
R&S NRP
‑
Z power sensor
●
Compatible Rohde & Schwarz instrument
●
R&S
NRP
‑
Z3 or R&S
NRP
‑
Z4 USB adapter or an R&S
NRP
‑
Z5 sensor hub
(optional)
Compatible Instrument
