Operating Concepts
R&S
®
NRP-Zxx
31
Getting Started 1176.8822.02 ─ 04
e) Confirm with "OK" to return to the "Licensing NRP-Z Power Sensors for
NRPV" dialog. The dialog indicates all currently connected sensors.
Note:
If you want to evaluate the R&S
NRPV before buying a license for your
power sensor, you can activate a sensor for temporary use. To do so, select
"Evaluate Without License" in the "Licensing NRP-Z Power Sensors for
NRPV" dialog. For a detailed description, refer to the operating manual of the
R&S
NRPV.
5. Switch on the test signal of the signal source.
6. To start a continuous measurement, select "Measure"
> "Continuous".
The "Continuous" measurement window appears. It shows the measurement
results numerically, and the control panel for accessing further dialogs with
parameters for measurement, evaluation and display.
For a detailed description of how to measure in this setup, refer to the operating
manual of the R&S
NRPV.
6.3
R&S
Power Viewer
The R&S
Power Viewer is software that simplifies many measurement tasks. It is
provided on your documentation CD-ROM and on the Rohde & Schwarz website
as a separate standalone installation package.
R&S
Power Viewer
