Preparing for Use
R&S
®
NRP-Zxx
12
Getting Started 1176.8822.02 ─ 04
4.1
EMI Suppression
Electromagnetic interference (EMI) can affect the measurement results.
To suppress generated electromagnetic interference:
●
Use suitable shielded cables of high quality. For example, use double-shielded
RF cables.
●
Always terminate open cable ends.
●
Note the EMC classification in the data sheet.
4.2
Unpacking and Checking the Power Sensor
Check the equipment for completeness using the delivery note and the accessory
lists for the various items. Check the power sensor for any damage. If there is
damage, immediately contact the carrier who delivered the instrument. Make sure
not to discard the box and packing material.
Packing material and transportation
Always make sure that sufficient mechanical and electrostatic protection is
provided when transporting the power sensors.
4.3
Connectors of the R&S NRP
‑
Z Power Sensors
An R&S NRP
‑
Z power sensor has two connectors, as shown in
Connectors of the R&S NRP
‑
Z Power Sensors
