Browser-Based User Interface
R&S
®
NRPxxT(N)
44
User Manual 1177.6023.02 ─ 08
Result pane
Displays the measurement result for the selected measurement mode. It can display
only a value or a graph, depending on the selected measurement mode.
6.2
Setting the Unit
You can set the unit for the different parameters by typing the corresponding letter after
the entered value.
1
2
3
Figure 6-2: Parameter
1 = Parameter name
2 = Value
3 = Unit
The following abbreviations are available:
Unit
Keyboard key
Decibel
d
Hertz
h
Second
s
Volt
v
Watt
w
Unit multiples
Keyboard key
Giga
g
Mega
m
Kilo
k
milli
m
micro
u
nano
n
Example:
To set the unit to 1
GHz, enter
1g
.
For certain units, you can select a different representation, depending on the require-
ments. For example, for the representation of the "Trigger Level", you can choose watt,
Setting the Unit
