Operating Concepts
R&S
®
NRPxxT(N)
38
User Manual 1177.6023.02 ─ 08
b) Select "Sensor > Zero (Signal off) ".
4. Switch on the test signal of the signal source.
5. For a continuous average measurement, select "Measurement"
> "Continuous".
The "Continuous" measurement window appears. It shows the measurement
results numerically and some parameters that can be configured.
6. To start the measurement press "Measurement"
> "Start".
The measurement result is shown in the "Continuous" measurement window.
For a detailed description of how to measure in this setup, refer to the operating man-
ual of your R&S
Power Viewer. The manual is installed automatically during the instal-
lation of the R&S
Power Viewer.
5.6
R&S
Power Viewer Mobile
The R&S
Power Viewer Mobile extends the functionality of the R&S
Power Viewer to
Android-based devices, such as a smartphone and tablets.
R&S
Power Viewer Mobile