Rohde & Schwarz NG-B105 User Manual Download Page 54

Page: 54 / 201

Instrument functions

R&S

NGP800

User Manual 5601.5610.02 ─ 09

Figure 6-9: Analog input dialog

4. Select the required type to regulate the channel output setting.

The R&S

NGP800 displays the "Select Analog Input Type" dialog.

Figure 6-10: Select analog input type dialog

5. Activate the "Enabled" menu item.

The R&S

NGP800 enables the "Analog in" input and disables the selected channel

settings (voltage or current).

6.4

Protection

There are various ways in which the R&S

NGP800 protects itself and the connected

load from damage due to overvoltage, overcurrent and overpower drawn by the load
during testing.

1. Press [Settings] key.

The R&S

NGP800 displays the device/channel menu window.

2. Select the required channel tab to configure the various protection dialogs.

Protection

Summary of Contents for NG-B105










































































































































































































Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands

Rohde & Schwarz NG-B105, User Manual

Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands