Instrument tour
R&S
®
HMP Series
32
Getting Started 1178.6791.02 ─ 03
Sense
4
mm safety sockets.
Two connectors provided for each channel are used for compensating lead resis-
tances.
CHn
4
mm safety sockets.
Depending on the instrument model, the number of output channels (up to four
channels) and the voltage and current range varies. See the labels next to the
connectors of each channel.
For detailed specifications, see the data sheet.
Protective conductor terminal
Protective ground socket (4
mm banana socket) to secure the R&S
HMP, e.g.
with a grounded external conductor.
The protective conductor terminal is directly connected to the mains safety
ground by the line cord.
See
Chapter 1.2, "Labels on the R&S
5.2
Rear panel tour
The rear panel covers the AC power supply, interfaces for remote control and out-
put terminals for connecting the R&S
HMP in a rack. The shown rear views of the
R&S
HMP2030 and the R&S
HMP4040 represent the elements for all instrument
models (standard equipment).
The interfaces for remote control vary, depending on the equipped option:
●
R&S
HO732 dual Ethernet / USB interface
●
R&S
HO720 dual RS232 / USB interface
●
R&S
HO740 IEE-488 GPIB interface
Rear panel tour
