Rohde & Schwarz GB4000V, User Manual

Page: 19 / 70

R&S GB4000V Audio Unit
User Manual 6174.7514.02 - 02 17
1. Insert the R&S GB4000V into the control panel or rack at its designated position.
2. Secure the unit by means of four screws passed through the bore holes in the
corners of the front panel.
The unit is to be mounted according to IEC 60297 (VAR02/03).
Figure 5: Bore holes for fixture of the R&S GB4000V.
When installing the unit ensure that existing sealing profiles are not damaged.
To prevent overheating damages make sure the ventilation holes on both sides of the
audio unit are not covered.
Make sure the environmental conditions specified in
“1.5”
are complied with.